+260 211243285

info@finecopglobal.com

Borehole Submersible Motors 4″ (D-Series-60Hz)

Borehole Submersible Motors 4″ (D-Series-60Hz)

Categories: , Brand:

Quick description:

Tormac ECO series submersible motors are ingeniously designed and developed employing latest engineering software’s, high-tech machinery & tools with the complement of cutting edge  technology for hardwearing and maintenance free operations and to ensure relentless performance.

The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance  systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

Tormac ECO series motors are squirrel cage, water filled and water cooled rewindable type. The winding of these two pole motors are made of a special water proof wire of pure electrolytic copper insulated with synthetic film or thermoplastic material. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

These motors are pre-filled with environmentally safe deionized water which acts as a lubricant & coolant. The prefilled water level to be ensured at the time of installation. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. The main advantage of rewindable motor construction is making the repair and rewinding easier and hassle free at field levels. All  Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

Availability:

In Stock

Compare

Technical Data

Specifications Nominal Diameter     (4”)
Rated Output & Voltage 0.37 to 2.2kW – 230V, 1Ph, 3Wire 0.37 to 7.5kW – 380/415V, 3Ph,
Rated Speed 2900
Voltage Tolerance -15%    +6%
Protection IP 58
Rotation Sequence CCW        – 1Ph CW, CCW –  3Ph
Outer Diameter 98mm
Duty S1 (Continuous)
Linear flow 0.15m/sec
Liquid Temperature 38˚C max
Switching Frequency 20 Times/Hour
Thrust load 0.37 to 1.5kW – 3000N/650lbs 2.2 to 7.5kW – 6500N/1500lbs
Mounting Dimensions NEMA Standard
Starting Method 1 Ph – CSCR 3 Ph – DOL
Motor Lead out type 3/4 core Rubber Insulated Flat Cable leads, internally connected with the windings.
Class of Insulation Y

All the Mounting dimensions are in accordance with NEMA standards.

Construction Features

Components Version – A Version – TN
Seal Housing Cast iron with S.S 304 shell Cast iron with S.S 316 shell
Upper and lower support Cast iron Cast iron
Shaft Seal NBR NBR
Wound Stator Shell S.S 304 S.S 316
Spline Shaft 417-4Ph 417-4Ph
Rotor Shaft EN-8/EN-9  EN-8/EN-9
Radial Bearings Graphite Carbon Graphite Carbon
Thrust Segment Carrier/Segments SG Iron / S.S 420 SG Iron / S.S 420
Thrust Disc Graphite Carbon  Graphite Carbon
Pressure Equalizing Diaphragm HNBR  HNBR
Diaphragm Cover S.S 304 S.S 316

Applications

  • Agriculture
  • Mining
  • Industries
  • Residential
  • Fire Fighting and Dewatering
  • Construction & Building Services

You May Also like

    Horizontal Open Well Submersible Pumps (TOH Series)

    0 out of 5

    Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.

    Cast Iron Pump (TC/TB – Series) 8”

    0 out of 5

    Tormac cast iron submersible pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type and provided with integral check-valve and NEMA standard coupling. These pumps are available with impellers made of bronze, diffusers made up of cast iron and the shaft is made of AISI 410/431. The integral check valve prevents back flow, up thrust and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.

    A.C. Induction Motor

    0 out of 5

    Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.

    Submersible Motor Eco Series 10″ (D-Series-60Hz)

    0 out of 5

    Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.

    The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

    Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

    These motors are pre-filled with environmentally safe deionised water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

X