Non Return Valve

Non Return Valve

Category: Brand:

Quick description:

Non return valves are fitted generally in the pipeline to prevent backwater pressure and safe guards the entire pumping units.

Available Nominal sizes in mm

Round type Non-Return valves: 50×50, 65×65, 80×80, 100×100

Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

Availability:

In Stock

Compare

Applications

It is suitable for pipelines projects,waterboosting units,irrigation,public water supply,industrial & rural water supply & civil applications

Features

  • Prevent water hammer, up thrust and back spin in the pumping system.
  • Synthetic rubber flap totally prevents water leakage
  • Ruggedly build with graded cast Iron.
  • Compact design and easy to install
  • By-pass arrangement is provided
  • Epoxy coated paint to prevent rust and corrosion

You May Also like

    Reflux Valve

    0 out of 5

    Reflux valve is fitted generally in the delivery pipeline to avoid water hammer, upthrust and back spin effects in the pumping system. Reflux valve can also be used anywhere in the suction line of which the bottom end is inserted in to a bore pipe or tube well.

    Available Nominal sizes in mm

    Square type Reflux valves: 40×40, 50×50, 65×65, 80×80, 100×100, 125×125 & 150×150.
    Round type Reflux valves: 50×50, 65×50, 65×5, 80×65, 80×80, 100×80, 100×100.

    Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

    Butterfly, Gate, Globe & Check Valves

    0 out of 5
    • Process industries
    • Pipe line systems
    • Construction Industries
    • Pharmaceutical
    • Power plants
    • Petro chemical & fertilizer industries
    • Fluid distribution systems
    • Water treatment plants
    • Refineries
    • Drilling rigs

    Air Valve

    0 out of 5

    To release air when the main is being filled and to close and remain closed when the pipe is full to prevent loss of water.

    Available Nominal sizes in mm

    Air valve: 12, 19, 25 & 50.

    Foot Valves

    0 out of 5

    Foot valve is generally placed at the lower end of suction pipe to retain water in the pump casing and suction pipe while pump is at rest consequently, when the pump is again started it does not have to be primed again and pump will deliver water continuously..it has a strainer at bottom portion hence it prevents any foreign particle entering the pump through the suction pipe.

    Available Nominal sizes in mm

    Screw type foot valves: 40, 50, 65, 80, 100, 125, & 150
    Flange type foot valves: 50, 65, 80 & 100.

    Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

X